Disassembly process of glass lined reactor

Sometimes companies need to dismantle the glass lined reactor for various reasons, such as site modification, equipment transfer, etc. The entire process has a relatively large amount of construction. If you do not master the knowledge of equipment disassembly in advance, it is easy to cause damage to the reactor equipment. Therefore, the editor uses the following content to help everyone understand its disassembly process:

　　1. Prepare for disassembly.

　　2. Prepare the necessary places and tools for dismantling the glass lined reactor (such as dial gauge, right magnetic base, feeler gauge, ruler, micrometer, caliper, etc.).

　　3. When there is no lifting equipment, a block block for lifting heavy parts is required. The block block has a load of 1.5 tons.

　　4. Remove the glass lined reactor cooling water system pipeline.

　　 5. Remove the oil piping system and drain the oil in the cooler.

　　6. Disassemble the heating pump door, the inlet drain door, the recirculation door, and the outlet check door.

　　7. Remove the pressure gauge tube, balance tube, inlet filter screen and pump cover of the glass lined reactor.

　　 You can follow the steps in the article to disassemble the glass lined reactor in turn. The disassembly process is relatively simple and reasonable, easy to implement, and can effectively solve the problem of rapid disassembly of the reactor during the temporary disassembly of the reactor. Of course, the disassembled structural parts of the reactor should be properly preserved. If stored outdoors, they should be protected from rain and sun, and moisture-proof measures should be taken when stored indoors.