Support method of glass lined reactor

Because the glass lined reactor is too large and delicate, we usually equip it with a suitable support frame to stabilize the equipment. Because the type and working method of the reactor are usually different, different types are processed for it on the market. Support frame for people to choose.

(1) In general, the torch support is selected. The torch support is to weld a tor-type support member on the upper end of the jacket part of the glass lined reactor, which is a support method that is welded to the upper end of the jacket part, which is a suspended type Support, so that it can be used in conjunction with other equipment such as condensers, pipes, storage tanks, etc. The operating table should be selected to support the ear. The design of the operating table is based on the size of the glass lined reactor, combined with channel steel, round pipes, etc. As a result, other equipment matched with the process is easy to install and operate.

　　 (2) If the glass lined reactor is used alone, it can be supported by legs. This type of support does not need to be welded to the operating table, but it should be noted that the length of the leg should be determined to avoid different lengths of support, which will make the center of gravity of the reactor and other equipment unstable and affect the operation.

　　 Note: The choice of vertical storage tank is the same as above, while the horizontal type uses saddle type support, that is, the two ends of the horizontal storage tank are slightly inward, and each has a saddle type support, which is a floor type support.

　　 When we choose the support method of the glass lined reactor, we must decide according to our own type, and we must also equip with suitable auxiliary tools for different support methods during actual installation so as to ensure the stability of the reactor support.